• 热门关键词:

公告

联系我们
上海耐夫机械有限公司

  • QQ:175228074
  • 电话:021-57579388
  • 电话:021-57579388
  • 传真:021-57570070
  • 黄经理:18918269881
  • 邮编:201403
  • 邮箱:175228074@.qq.com
  • 网址:www.shnaifujixie.com
  • 地址:中国上海奉贤区金大公路7939号
产品中心
当前位置: 网站首页   >   产品中心
  • 减速机330

    减速机330

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF330220129:130000±3°3~6 机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • 减速机430

    减速机430

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF430333134:156000±(5~6)°8~9 机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • 减速机530

    减速机530

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF530342136:162000±6°9~10机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • 减速机730

    减速机730

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF730349145:174000±6°12~14 机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • 减速机830

    减速机830

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF830370148:188000±6°16~20 机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • 减速机830

    减速机830

    型号重量(kg)减速比(i)**输出扭矩(N.M)**安装角度(°)搅拌罐容积(m平方米)NF830370148:188000±6°16~20 机型特点 上海耐夫机械有限公司专业生产NF系列搅拌车减速机,该系列减速机采用德国先进技术,两级行星齿轮传动,结构紧凑,使用寿命长。为搅拌机提供可靠和强劲的驱动系统。配套搅拌罐容量为3m3至18 m3。减速机箱体用螺栓安装在支座上,可直接与车架相连,并通过输出法兰盘与搅拌罐连接。安装时输出法兰盘在摆支角范围内可以摆动。NF减速机可替代的同类产品有:德国采埃孚(ZF)及意大利的邦飞利、PMP、TOP等搅拌车用减速机。 Model Features Shanghai Machinery Co.,Ltd.specializes in producing resistant husband NF series mixer reducer ,the series reducer Germany adanced technology ,two –stage planetary gear drive,compact ,long life .To provide reliable and robust mixer drive system.Supporting the mixing tank capacity of 3 m3to20 m3,Reducer casing mounted on abracket with bolts can be connected directly to the frame and connected  via the output flange and mixing tank .When installing the output flange branch in swing angle range can swing .NF reducer alternative similar products are :Germany,ZF(zf) and ltaly Bonfiglioli,PMP ,TOP and other mixer reducer,类产品有:德国采埃孚(ZF)及意大利的邦飞利.PMP .TOP等搅拌车用减速机。

  • Lite4 切管机 PIPE CUTTING MACHINE

    Lite4 切管机 PI

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WLite4?-4" 0.02"-0.12"0.5-3mm1000v3D-150110/220V50/60Hz25kg55ld应用Application高合金钢(如不锈钢)High-alloy    steel(Stainless Steel)低合金钢及非合金钢    Low alloy   steel and non-alloy steel铸铁                  Cast  iron有色金属及塑料        Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 4寸    切管机

    4寸 切管机

    切管机4寸型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WR4?-4"80-182mm0.04"-0.22"1-7mm1600v150-250110/220V50/60Hz75kg165ld应用Application高合金钢(如不锈钢)High-alloy  steel(Stainless Steel)低合金钢及非合金钢  Low alloy   steel and non-alloy steel铸铁                Cast  iron有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

  • 6寸    切管机

    6寸 切管机

    切管机6寸型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WR6?-4"80-182mm0.04"-0.22"1-7mm1600v150-250110/220V50/60Hz75kg165ld应用Application高合金钢(如不锈钢)High-alloy  steel(Stainless Steel)低合金钢及非合金钢  Low alloy   steel and non-alloy steel铸铁                Cast  iron有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

  • 8寸    切管机 PIPE CUTTING MACHINE

    8寸 切管机 PI

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF86”-8”150-230mm08”-0.4”2-10mm1600W150-250110/220V50/60Hz110kg2421b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 8寸   切管机 8 " PIPE CUTTING MACHINE

    8寸 切管机 8 "

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF86”-8”150-230mm08”-0.4”2-10mm1600W150-250110/220V50/60Hz110kg2421b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 12寸   切管机 12" PIPE CUTTING MACHINE

    12寸 切管机 12

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF128”-12”215-325mm0.08”-0.4”2-10mm1600W150-250110/220V50/60Hz130kg2861b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

Copyright ©2014. All rights reserved. 上海耐夫机械有限公司
   | 技术支持:担路网|后台登录入口
  • 电话咨询
  • 18918269881
  • 021-57579388
  • 021-57579388
None