• 热门关键词:

公告

联系我们
上海耐夫机械有限公司

  • QQ:175228074
  • 电话:021-57579388
  • 电话:021-57579388
  • 传真:021-57570070
  • 黄经理:18918269881
  • 邮编:201403
  • 邮箱:175228074@.qq.com
  • 网址:www.shnaifujixie.com
  • 地址:中国上海奉贤区金大公路7939号
切管机 PIPE CUTTING MACHINE
当前位置: 网站首页   >   产品中心
  • Lite4 切管机 PIPE CUTTING MACHINE

    Lite4 切管机 PI

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WLite4?-4" 0.02"-0.12"0.5-3mm1000v3D-150110/220V50/60Hz25kg55ld应用Application高合金钢(如不锈钢)High-alloy    steel(Stainless Steel)低合金钢及非合金钢    Low alloy   steel and non-alloy steel铸铁                  Cast  iron有色金属及塑料        Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 4寸    切管机

    4寸 切管机

    切管机4寸型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WR4?-4"80-182mm0.04"-0.22"1-7mm1600v150-250110/220V50/60Hz75kg165ld应用Application高合金钢(如不锈钢)High-alloy  steel(Stainless Steel)低合金钢及非合金钢  Low alloy   steel and non-alloy steel铸铁                Cast  iron有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

  • 6寸    切管机

    6寸 切管机

    切管机6寸型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转数Knife  speed电压频率Voltage/frequency净重N.WR6?-4"80-182mm0.04"-0.22"1-7mm1600v150-250110/220V50/60Hz75kg165ld应用Application高合金钢(如不锈钢)High-alloy  steel(Stainless Steel)低合金钢及非合金钢  Low alloy   steel and non-alloy steel铸铁                Cast  iron有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

  • 8寸    切管机 PIPE CUTTING MACHINE

    8寸 切管机 PI

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF86”-8”150-230mm08”-0.4”2-10mm1600W150-250110/220V50/60Hz110kg2421b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 8寸   切管机 8 " PIPE CUTTING MACHINE

    8寸 切管机 8 "

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF86”-8”150-230mm08”-0.4”2-10mm1600W150-250110/220V50/60Hz110kg2421b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world's  leading technology, exported to the South and North American,Europe and Southeast Asia etc.○It can be regulated according to pipe material ,low speed is ideal for  cutting  stainless steel pipe.○The cutting blade start from one best point, and cutting from inside to outside.○Easy and fast to change blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for stainless steel pipe welding after cutting.○Simultaneous gripping when cutting pipe.○Speed regulation to match wall thickness and different materials ,it  can be finished  within several seconds. 

  • 12寸   切管机 12" PIPE CUTTING MACHINE

    12寸 切管机 12

    型号Model公称直径Nominal diameter壁厚Wall thickness马达Motor刀片转速Knife speed电压频率Voltage/frequency净重N.WNF128”-12”215-325mm0.08”-0.4”2-10mm1600W150-250110/220V50/60Hz130kg2861b应用Application 高合金钢(如不锈钢)High-alloy steel (Stainless Steel) 低合金钢及非合金钢  Low alloy steel and non –alloy steel 铸铁                Cast iron 有色金属及塑料      Non-ferrous metal切管机具有以下优点:1.  该行星式切管机采用国际****,远销南北美,欧洲,东南亚等数十国2.  切割速度可根据切割的管子材质不同而进行调节,如低速用于不锈钢管3.  该行星式切管机刀片在一点最佳位置切入由内向外切割4.  行星式切管机快速更换刀片,刀片可通用于AXXAIR CC120及GF+切管机5.  是不锈钢管切割后直接焊接的最佳选择6.  切管子时对切割管材进行多点夹紧7.  切管的管材管径调节快速,可在几秒钟内完成Key Specifications/Special Features:○Pipe cutting machine adopt world’s  leading technology, it is exported to the  American South and the American Nouth,EU,Southeast Asia○It can be regulated according to pipe material ,low speed is ideal for cutting  stainless steel pipe.○The blade cut into the tubing at a point ,inside-out.○Easy to cange blade,the blade generally apply to AXXAIR CC120 and GF+ Pipe cutting○It is the best choice for the directly welded.○Simultaneous gripping when cutting tubing.○Speed regulation to match wall thickness and different materials ,it can be finished  within several minutes.

Copyright ©2014. All rights reserved. 上海耐夫机械有限公司
   | 技术支持:担路网|后台登录入口
  • 电话咨询
  • 18918269881
  • 021-57579388
  • 021-57579388
None